China GDCR9300 Wireless Clamp Ammeter Manufacture and Factory

国产精品盗摄一区二区在线-国产精品盗摄在线观看-国产精品对白刺激久久久-国产精品对白刺激音频在线观看-国产精品对白交换-国产精品对白交换绿帽视频

GDCR9300 Wireless Clamp Ammeter

Brief Description:

GDCR9300?Wireless H/L Voltage Hook Type Current Meter break through the traditional structure, specially designed and manufactured for measuring high voltage current, the unique hook type opening mouth structure realizes the unimpeded measurement, and very convenient?for field test. The meter is composed of special large-caliber hook type current meter?with high?voltage insulation rod, equipped with wireless receiver, which can receive?the?measured data within 100 meters?straight?line distance, current range: AC 0.00A-9999A. In?low voltage lines below 600V, the line current can be measured directly by hook meter without insulation rod.

Send email to us

Product Detail

Product Tags

Features

Function	Measurement of high voltage AC current, low voltage AC current, on-line monitoring AC current.
Power Supply	DC6V Alkaline Dry Battery (1.5V AAA X4pcs)
Test Mode	Clamp CT
Transmission Mode	433MHz wireless transmission, distance about 100m
Display Mode	4 digital LCD display, backlight function, suitable for dark place.
LCD Dimension	47mm*28.5mm
Meter Dimension	Detector: 210mm246mm45mm Receiver: 78mm165mm42mm
CT Size	Φ128mm
Sampling Rate	2 times/second
Measure Range	0.00A~9999A(50/60Hz Auto Identification)
Resolution	0.01A
Shift	0.00A?~9999A?Automatic Shift
Test Accuracy	±2%rdg±5dgt(The wire is located near the center of the bottom of the u-type clamp,?23℃±2℃)
Position Error	The measured conductor should be located as close as possible to the center of the top of the hook type clamp, and not close to the top of the u-type clamp. The test error on the top of the u-shaped clamp will increase by about one time or more
Data Storage	99 sets, in storage process “MEM” symbol display, “FULL” symbol flash indicate storage is full
Line Voltage	Below 110kV current test, operate with insulation rods (below?500kV can be customized, only for GDCR9000B)
Data Hold	In general test mode, press HOLD?key to hold data, “HOLD” symbol display. press HOLD?Key once again to cancel this function
Data Access	“MR” symbol display, it can look over all the stored data
Overflow Display	Exceed measurement range overflow function: “OL A” symbol display
No signal Indication	When the receiver has not received transmit signal, dynamic display “no- -” symbol.
Auto Shut Down	About 15 minutes after booting up, the meter will shut down automatically without any operation, to decrease the battery consumption.
Battery Voltage	When the battery voltage is lower than 4.8V, the receiver display low battery voltage symbol?“ ???”(the detector low voltage display “ ????” symbol, the receiver low voltage continue display), remind to replace battery.
Meter Weight	Detector: About 300g, Receiver: 280g Total weight of meter: about 2300g (including insulation rod and battery.)
Working Temperature	-10°C~40°C; Below 80%RH
Storage Temperature	-10°C~60°C; Below 70%RH
Interference	Should avoid 315Mhz,433Mhz Same frequency signal interference
Insulation Rod Dimension	4300mm
Insulation Strength	AC 110kV/rms (The telescopic insulation rod is fully opened?between the two ends)
Structure	Anti-Dripping Type II